|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
gs74117ax 256k x 16 4mb asynchronous sram 8, 10, 12 ns 3.3 v v dd center v dd and v ss fp-bga commercial temp industrial temp rev: 1.05b 6/2010 1/12 ? 2001, gsi technology specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. features ? fast access time: 8, 10, 12 ns ? cmos low power operation: 130/105/95 ma at minimum cycle time ? single 3.3 v power supply ? all inputs and outputs are ttl-compatible ? byte control ? fully static operation ? industrial temperature option: ?40 to 85c ? package: x: 6 mm x 10 mm fine pitch ball grid array package gx: pb-free 6 mm x 10 mm fine pitch ball grid array package description the gs74117a is a high speed cmos static ram organized as 262,144 words by 16 bits. stat ic design eliminates the need for external clocks or timing strobes. the gs operates on a single 3.3 v power supply and all inputs and outputs are ttl- compatible. the gs74117a is available in a 6 x 10 mm fine pitch bga package. pin descriptions symbol description a 0 ?a 17 address input dq 1 ?dq 16 data input/output ce chip enable input lb lower byte enable input (dq1 to dq8) ub upper byte enable input (dq9 to dq16) we write enable input oe output enable input v dd +3.3 v power supply v ss ground nc no connect 1 2 3 4 5 6 a lb oe a 0 a 1 a 2 nc b dq 1 ub a 3 a 4 ce dq 16 c dq 3 dq 2 a 5 a 6 dq 15 dq 14 d v ss dq 4 a 17 a 7 dq 13 v dd e v dd dq 5 nc a 16 dq 12 v ss f dq 6 dq 7 a 8 a 9 dq 10 dq 11 g dq 8 nc a 10 a 11 we dq 9 h nc a 12 a 13 a 14 a 15 nc fine pitch bga 256k x 16 bump configuration package x 6 x 10 mm substrate top view
memory array row decoder column decoder address input buffer control i/o buffer a 0 ce we oe dq 1 a 17 dq 16 ub _____ block diagram truth table ce oe we lb ub dq 1 to dq 8 dq 9 to dq 16 v dd current h x x x x not selected not selected isb 1 , isb 2 l l h l l read read i dd l h read high z h l high z read l x l l l write write l h write not write, high z h l not write, high z write l h h x x high z high z l x x h h high z high z gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 2/12 ? 2001, gsi technology x: ?h? or ?l? absolute maximum ratings parameter symbol rating unit supply voltage v dd ?0.5 to +4.6 v input voltage v in ?0.5 to v dd +0.5 ( 4.6 v max.) v output voltage v out ?0.5 to v dd +0.5 ( 4.6 v max.) v allowable power dissipation pd 0.7 w storage temperature t stg ?55 to 150 o c gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 3/12 ? 2001, gsi technology note: permanent device damage may occur if absolute maximum ratings ar e exceeded. functional operation shall be restricted to recommended operating conditions. exposure to higher than recommended voltages for extended peri ods of time could affect device reliability . recommended oper ating conditions parameter symbol min typ max unit supply voltage for -8/-10/-12 v dd 3.0 3.3 3.6 v input high voltage v ih 2.0 ? v dd +0.3 v input low voltage v il ?0.3 ? 0.8 v ambient temperature, commercial range t ac 0 ? 70 o c ambient temperature, industrial range t a i ?40 ? 85 o c notes: 1. input overshoot voltage should be less than v dd +2 v and not exceed 20 ns. 2. input undershoot voltage should be greater than ?2 v and not exceed 20 ns. capacitance parameter symbol test condition max unit input capacitance c in v = 0 v 5 pf output capacitance c out v = 0 v 7 pf gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 4/12 ? 2001, gsi technology notes: 1. tested at t a = 25c, f = 1 mhz 2. these parameters are sampled and are not 100% tested. dc i/o pin characteristics parameter symbol test conditions min max input leakage current i il v in = 0 to v dd ? 1 ua 1 ua output leakage current i lo output high z v out = 0 to v dd ?1 ua 1 ua output high voltage v oh i = ?4 ma 2.4 ? output low voltage v ol i = +4 ma ? 0.4 v power supply currents parameter symbol test conditions 0 to 70c ?40 to 85c unit 8 ns 10 ns 12 ns 8 ns 10 ns 12 ns operating supply current i dd ce v all other inputs v or v min. cycle time i = 0 ma 130 105 90 140 115 100 ma standby current i sb1 ce v all other inputs v or v min. cycle time 30 25 22 40 35 32 ma standby current i sb2 ce v ? 0.2 v all other inputs v ? 0.2 v or 0.2 v 10 20 ma in out oh lo il ih il out ih ih il dd dd dq vt = 1.4 v 50 30pf 1 dq 3.3 v output load 1 output load 2 589 434 5pf 1 notes: 1. include scope and jig capacitance. 2. test conditions as specified with output loading as shown in fig. 1 unless otherwise noted. 3. output load 2 for t lz , t hz , t olz and t ohz parameter conditions input high level v ih = 2.4 v input low level v il = 0.4 v input rise time tr = 1 v/ns input fall time tf = 1 v/ns input reference level 1.4 v output reference level 1.4 v output load fig. 1& 2 gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 5/12 ? 2001, gsi technology ac test conditions gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 6/12 ? 2001, gsi technology ac characteristics read cycle parameter symbol -8 -10 -12 unit min max min max min max read cycle time t rc 8 ? 10 ? 12 ? ns address access time t aa ? 8 ? 10 ? 12 ns chip enable access time ( ce ) t ac ? 8 ? 10 ? 12 ns byte enable access time ( ub , lb ) t ab ? 3.5 ? 4 ? 5 ns output enable to output valid ( oe ) t oe ? 3.5 ? 4 ? 5 ns output hold from address change t oh 3 ? 3 ? 3 ? ns chip enable to output in low z ( ce ) t * 3 ? 3 ? 3 ? ns output enable to output in low z ( oe ) t * 0 ? 0 ? 0 ? ns byte enable to output in low z ( ub , lb ) t * 0 ? 0 ? 0 ? ns chip disable to output in high z ( ce ) t * ? 4 ? 5 ? 6 ns output disable to output in high z ( oe ) t * ? 3.5 ? 4 ? 5 ns byte disable to output in high z ( ub , lb ) t * ? 3.5 ? 4 ? 5 ns * these parameters are sampled and are not 100% tested. t aa t oh t rc address data out previous data data valid read cycle 1: ce = oe = v il , we = v ih , ub and, or lb = v il lz olz blz hz ohz bhz taa trc address tac tlz tab tblz toe tolz ce ub , lb oe data out thz tbhz tohz data valid high impedance gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 7/12 ? 2001, gsi technology read cycle 2: we = v ih write cycle parameter symbol -8 -10 -12 unit min max min max min max write cycle time twc 8 ? 10 ? 12 ? ns address valid to end of write taw 5.5 ? 7 ? 8 ? ns chip enable to end of write tcw 5.5 ? 7 ? 8 ? ns byte enable to end of write tbw 5.5 ? 7 ? 8 ? ns data set up time tdw 4 ? 4.5 ? 6 ? ns data hold time tdh 0 ? 0 ? 0 ? ns write pulse width twp 5.5 ? 7 ? 8 ? ns address set up time tas 0 ? 0 ? 0 ? ns write recovery time ( we ) twr 0 ? 0 ? 0 ? ns write recovery time ( ce ) twr1 0 ? 0 ? 0 ? ns output low z from end of write twlz * 3 ? 3 ? 3 ? ns write to output in high z twhz * ? 3.5 ? 4 ? 5 ns * these parameters are sampled and are not 100% tested. twc address ce ub , lb we data in oe data out taw tcw tbw tas twp twr tdw tdh twlz twhz data valid high impedance gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 8/12 ? 2001, gsi technology write cycle 1: we control twc address ce ub , lb we data in oe data out taw twp tas tcw twr1 tdw tdh data valid high impedance tbw write cycle 2: ce control twc address ce ub , lb we data in oe data out taw twp tas tcw twr1 tdw tdh data valid high impedance tbw gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 9/12 ? 2001, gsi technology write cycle 3: ub , lb control pin a1 index a1 e top view side view d a aaa pin a1 index e1 bottom view d1 c e e solder ball f b symbol unit: mm a 1.100.10 a1 0.20~0.30 f b f 0.30~0.40 c 0.36(typ) d 10.00.05 d1 5.25 e 6.00.05 e1 3.75 e 0.75(typ) aaa 0.10 a b c d e f g h 1 2 3 4 5 6 gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 10/12 ? 2001, gsi technology package x?6 mm x 10 mm fp-bga gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 11/12 ? 2001, gsi technology * customers requiring deliv ery in tape and reel should add the character ?t? to the end of the part number. for example: gs74117 ax-8t ordering information part number * package access time temp. range gs74117ax-8 6 mm x 10 mm bga 8 ns commercial gs74117ax-10 6 mm x 10 mm bga 10 ns commercial gs74117ax-12 6 mm x 10 mm bga 12 ns commercial gs74117ax-8i 6 mm x 10 mm bga 8 ns industrial gs74117ax-10i 6 mm x 10 mm bga 10 ns industrial gs74117ax-12i 6 mm x 10 mm bga 12 ns industrial gs74117agx-8 pb-free 6 mm x 10 mm bga 8 ns commercial gs74117agx-10 pb-free 6 mm x 10 mm bga 10 ns commercial gs74117agx-12 pb-free 6 mm x 10 mm bga 12 ns commercial gs74117agx-8i pb-free 6 mm x 10 mm bga 8 ns industrial gs74117agx-10i pb-free 6 mm x 10 mm bga 10 ns industrial GS74117AGX-12I pb-free 6 mm x 10 mm bga 12 ns industrial 4mb asynchronous datash eet revision history rev. code: old; new types of changes format or content page #/revisions/reason 74117a_r1 format/content ? creation of new datasheet 74117a_r1; 74117a_r1_01 content ? updated recommended operating conditions table on page 3 ? updated read cycle and write cycl e ac characteristics tables 74117a_r1_01; 74117a_r1_02 content ? removed 6 ns speed bin from entire document 74117a_r1_02; 74117a_r1_03 content ? removed 7 ns speed bin from entire document 74117a_r1_03; 74117a_r1_04 format ? updated format 74117a_r1_04; 74117a_r1_05 content ? added pb-free information for fp-bga package ? (rev1.05a: removed empty status column on ordering information table) ? (rev1.05b: changed 6 x 10 mm ball pitch reference on page 1 to 6 x 10 mm substrate) gs74117ax specifications cited are subject to change without notice . for latest documentation see http://www.gsitechnology.com. rev: 1.05b 6/2010 12/12 ? 2001, gsi technology |
Price & Availability of GS74117AGX-12I |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |